Limited to eight pieces each in red gold and platinum, the Time Pyramid 42.5 Agate frames Arnold & Son’s vertical calibre between translucent slices of natural red and blue agate.
PRESS RELEASE | 574 WORDS | 3 MINUTE READ
Photo Courtesy: Arnold & Son
A Pyramid Set in Stone
Arnold & Son introduces two new interpretations of the Time Pyramid, presented under the Maison’s Chronometry principle, which is devoted to the pursuit of horological precision. Measuring 42.5 mm, the watches are offered in 18-carat red gold or 950 platinum, each in a strictly limited edition of eight pieces. Their dials and case backs are crafted from thin slices of natural agate: red for the gold version and blue for the platinum model.
Architecture Drawn from Precision Clocks
The Time Pyramid draws on the heritage of 19th-century precision regulators and British skeleton clocks, some of which were created by John Roger Arnold, the only son of John Arnold. That lineage informs a three-dimensional approach to measuring time that has become a cornerstone of the Maison’s visual identity.
Unlike conventional movement layouts, the in-house manual-winding A&S1615 calibre is arranged vertically along a 6-to-12 o’clock axis. Its circular geometry is built around an annular main plate, which carries the bridges for the power-reserve indicators at the periphery. The arrangement frees much of the central space and gives the structure its distinctive appearance.
Circles, Translucency and Agate
A succession of circles follows the same vertical axis. The winding crown at 6 o’clock provides the visual starting point, drawing the eye upwards to the hours dial, cut from red agate on the red gold 5N version and blue agate on the platinum edition. At just 0.4 mm thick, the stone is translucent enough to reveal the seconds ring positioned partially beneath it. Above, at 12 o’clock, the balance wheel sits below a triangular balance cock and carries traditional poising screws around its rim.
A Mineral Backdrop
At the back of both models, Arnold & Son places a large agate disc measuring 0.8 mm thick. Formed over thousands of years, each stone lends these limited editions an individual character. The blue agate, which the Maison likens to deep space or the Arctic Ocean, offers a calm background, while the red agate is fiery and radiant, capturing the light.
Against this backdrop, the two barrels stand out clearly. Positioned side by side, they transmit their energy through a linear gear train to the Swiss lever regulating system at 12 o’clock, at the summit of the pyramid. The contrast between the stone, the chamfered bridges and the gilded or rhodium-plated wheels accentuates the three-dimensional architecture of the calibre.
Dual Power Reserve and Hand Finishing
Two separate power-reserve indicators sit on either side of the central gear train, each showing the energy remaining in one of the two barrels. Together, the barrels provide a total power reserve of 90 hours. The movement is finished to haute horlogerie standards, with hand-chamfered bridges, polished flanks, Côtes de Genève and blued screws.
On the Wrist
Water-resistant to three bar, both editions are fitted with hand-stitched alligator leather straps in amber brown or azure blue, secured by traditional pin buckles in gold or platinum. By pairing its mechanical architecture with the mineral character of agate, Arnold & Son places the Time Pyramid at the crossroads of watchmaking and kinetic art.
Availability
The Time Pyramid 42.5 Agate by Arnold & Son is featured on the official website and offered through the Maison’s authorised retailers, in two limited editions of eight pieces each.
For further information, visit: https://www.arnoldandson.com/collections/time-pyramid/.

